Cisco 10005 ESR Manual

Browse online or download pdf Manual for Network Router Cisco 10005 ESR. Cisco 10005 ESR 33 pages.

Print Page

Maintaining the Cisco 10005 ESR

The Cisco 10005 ESR is configured to your order and ready for installation when

it arrives. After you install the system, you may have to perform specific

maintenance procedures to ensure the router operates properly. These routine

procedures include replacing the filter, upgrading system components, or

replacing field replaceable units (FRUs). This chapter contains the information

necessary to perform that maintenance for the Cisco 10005 ESR.

Detailed instructions are also shipped with FRUs and upgrade kits.

Note

System components fall into two categories: hot swappable components that do

not require you to power off the system before replacing them, and those

components that do require you to power off the system before you replace them.

For example, all line cards are hot-swappable and can be replaced without

powering off the system, but you must power off the system before replacing a

single power module or a single Performance Routing Engine (PRE).

To prevent alarms from activating, you must administratively shut down a line

Note

card before hot swapping it.

OL-1102-07

C H A P T E R

Cisco 10005 ESR Hardware Overview and Maintenance Guide

3-1