Cisco 10008 Quick Start Manual - Page 30

Browse online or download pdf Quick Start Manual for Network Router Cisco 10008. Cisco 10008 49 pages. Cisco systems router quick start guide

Print Page

Use the following procedure to connect a video terminal to the console port on a PRE:

Figure 23

Console Port Connection on the PRE

Connect one end of the RJ-45 crossover cable to the serial RJ-45 port (CONSOLE) on the PRE.

Step 1

Run the cable up and through the cable-management bracket and connect the other end of the RJ-45 crossover cable

Step 2

to the RJ-45 adapter (Figure 24). If your terminal is equipped with a DB-25 serial connector, use the RJ-45-to-DB-25

adapter. If your terminal is equipped with a DB-9 serial connector, use the RJ-45-to-DB-9 adapter.

Figure 24

Connecting an RJ-45-to-DB-9 Console Cable Adapter

Connect the adapter to your video terminal to complete the cable connection.

Step 3

Power on your video terminal.

Step 4

Configure your video terminal to match the following default console port settings:

Step 5

• 9600 baud

• 8 data bits

• No parity generation or checking

• 1 stop bit

• No flow control

C IS C O

1 0 0 0 0