Cisco 10008 Quick Start Manual - Page 34

Browse online or download pdf Quick Start Manual for Network Router Cisco 10008. Cisco 10008 49 pages. Cisco systems router quick start guide

Print Page

Auxiliary Modem Connection

This asynchronous EIA/TIA-232 serial port is used to connect a modem to the PRE for remote administrative access. Use the

following procedure to connect the Cisco 10008 router to a modem.

Figure 27

Connecting the Modem Cable to the Auxiliary Port

Connect one end of the modem cable to the RJ-45 port on the primary PRE, labeled AUX.

Step 1

Step 2

Run the cable up and through the cable-management bracket and connect the other end of the cable to your modem.

Installing Network Cables to the Line Cards

See the

Cisco 10000 Series Routers Line Card Hardware Installation

cards and the Carrier, optical devices, cables, and specifications for line cards. Install all optical devices and attach all network

cables to the line cards before you power on the system.

C IS C O

1 0 0 0 0

Guide for instructions and information on installing line