Cisco 12000 - Series Chassis Modular Expansion Base Replacement Instructions Manual - Page 18
Browse online or download pdf Replacement Instructions Manual for Network Router Cisco 12000 - Series Chassis Modular Expansion Base. Cisco 12000 - Series Chassis Modular Expansion Base 40 pages. Internet router line card failures
Also for Cisco 12000 - Series Chassis Modular Expansion Base: Datasheet (9 pages), Overview Manual (6 pages), Hardware Troubleshooting Manual (18 pages)
Print Page
Preparing for Installation
Preparing for Installation
Installation preparation is presented in the following sections:
•
•
•
Safety Guidelines
Before you perform any procedure in this publication, review the safety guidelines in this section to
avoid injuring yourself or damaging the equipment.
The following guidelines are for your safety and to protect equipment. The guidelines do not include all
hazards. Be alert.
Review the safety warnings listed in the Regulatory Compliance and Safety Information for
Note
Cisco 12000 Series Internet Routers publication (Document Number 78-4347-xx) that accompanied
your router before installing, configuring, or maintaining a line card or its components.
•
•
•
Preventing Electrostatic Discharge
Electrostatic discharge (ESD) damage, which can occur when electronic cards or components are
improperly handled, results in complete or intermittent failures. Electromagnetic interference (EMI)
shielding is an integral component of the line card. Cisco recommends using an ESD-preventive strap
whenever you are handling network equipment or one of its components.
The following are guidelines for preventing ESD damage:
•
•
•
•
Cisco 12000 Series Router Memory Replacement Instructions
18
Safety Guidelines
Preventing Electrostatic Discharge
Required Tools and Equipment
Keep the work area clear and dust free during and after installation. Do not allow dirt or debris to
enter into any components.
Do not wear loose clothing, jewelry, or other items that could get caught in the router while working
with line cards or components.
Cisco equipment operates safely when it is used in accordance with its specifications and product
usage instructions.
Always use an ESD-preventive wrist or ankle strap and ensure that it makes good skin contact.
Connect the equipment end of the connection cord to an ESD connection socket on the router or to
bare metal on the chassis.
Handle line cards by the captive installation screws, the provided handle, ejector levers, or the line
card metal carrier only; avoid touching the board or connector pins.
Place a removed line card board-side-up on an antistatic surface or in a static shielding bag. If you
plan to return the component to the factory, immediately place it in a static shielding bag.
Avoid contact between the line card and clothing. The wrist strap only protects the board from ESD
voltages on the body; ESD voltages on clothing can still cause damage.
78-4338-16