Cisco 12406 series Replacement Instructions Manual - Page 17

Browse online or download pdf Replacement Instructions Manual for Network Router Cisco 12406 series. Cisco 12406 series 44 pages. Chassis replacement instructions
Also for Cisco 12406 series: Unpacking Instructions Manual (16 pages), Datasheet (9 pages)

Print Page

Remove the card:

Step 5

Loosen the two ejector lever captive screws at each end of the line card faceplate.

Simultaneously pivot the ejector levers outward, away from each other and away from the card

faceplate to unseat the line card from the backplane connector. (See

Figure 13

Fully remove each line card from the slots. Do not allow a line card to rest partially inserted into a slot,

Caution

because that will damage the EMI shielding on the RP or line card in the slot directly below.

Grasp the edges of the line card carrier with both hands to support it, and fully remove the line card

from the slot.

Caution

One edge of the card carrier faceplate is lined with an EMI-preventive gasket consisting of many raised,

conductive contacts. Be careful not to damage the gasket contacts, because a damaged card carrier gasket

can reduce EMI performance.

Caution

Handle the RP or line cards by the metal card carrier edges only; avoid touching the board itself or any

connector pins.

78-16109-01

Removing an RP or Line Card from the Card Cage

GIG AB

CI SC O 12

00 0

SERIE S

GIG ABI T

SW ITC H

RO UT ER

IT RO UT

E PRO CES

SOR

Cisco 12006 and Cisco 12406 Router Chassis Replacement Instructions

Figure

13.)