Cisco 12816 Replacement Instructions Manual - Page 15
Browse online or download pdf Replacement Instructions Manual for Network Router Cisco 12816. Cisco 12816 32 pages. Blower module and air filter for cisco 12016, cisco 12416, and cisco 12816 router
Also for Cisco 12816: Unpacking Instructions Manual (28 pages), Datasheet (9 pages), Instructions Manual (16 pages), Replacement Instructions Manual (18 pages)
Print Page
Tilt the safety hand truck onto its outrigger wheels to move the chassis to a level, open space with a solid
Step 8
floor, where the chassis can be repackaged for shipping.
If you plan to return the defective chassis to the factory, repackage it in the original shipping container
or a replacement shipping container acquired from Cisco. For information on repackaging the chassis,
see the
and the
Installing the Replacement Chassis
Procedures for installing the replacement chassis are described in the following sections:
•
•
•
•
•
Positioning the Replacement Chassis for Insertion into the Rack
Position the replacement chassis and scissor-jack platform in front of the rack with the back panel of the
chassis facing the rack opening, and the back of the scissor-jack platform butted against the
rack-mounting platform in the rack. (See
Figure 9
platform (closed)
78-16082-01
"Reinstalling the Chassis and Scissor-Jack Platform in the Shipping Pallet" section on page 23
"Packaging the Replaced Chassis for Shipment" section on page
Positioning the Replacement Chassis for Insertion into the Rack, page 15
Inserting the Chassis into the Rack, page 16
Reattaching Supplemental Bonding and Grounding Connections, page 20
Reattaching the Vertical Cable-Management Troughs, page 21
Completing the Installation, page 21
Positioning the Chassis to Insert It into the Rack
Front panel
of chassis
Scissor-jack
Cisco 12016, Cisco 12416, and Cisco 12816 Router Chassis Replacement Instructions
Figure
9.)
Rear panel
of chassis
Rack-mounting
Removing and Installing the Chassis
23.
Rack
platform
15