Cisco 1600 series Quick Start Manual - Page 2
Browse online or download pdf Quick Start Manual for Network Router Cisco 1600 series. Cisco 1600 series 12 pages. Rdiag router analog ipsec
Also for Cisco 1600 series: Quick Start Manual (8 pages), Installing Or Replacing Manual (10 pages), Hardware Installation Manual (14 pages)
Print Page
Unpack the Box.
Note: For Items That You Provide—You need only the items required to install your specific Cisco 1600 model.
Cables ordered from Cisco are colored as shown below.
Note: The Cisco 1600 series routers are either of run-from-flash (RFF) or run-from-RAM (RFR) models. In
this document, model names without an R refer to both models. The "Router Memory" section in the hardware
installation guide that came with your router describes the differences between RFF and RFR models.
2
Cisco 1600 Router
Accessory Kit Items
Console cable
(light blue, RJ-45-to-DB-9)
Power supply
Power cord (black)
DB-25-to-DB-9 console
adapter (light gray)
Product documentation
Items That You Provide
Serial cable (Cisco 1601)
(blue if ordered from Cisco)
Ethernet AUI cable
10BaseT Ethernet cable
RJ-48S-to-RJ-48S (Cisco 1602)
(blue, if ordered from Cisco)
RJ-45-to-RJ-45
(red if ordered from Cisco for Cisco 1603)
(orange if ordered from Cisco for Cisco 1604)
Ethernet AUI transceiver or Ethernet 10BaseT hub
WAN interface card
(optional, might already be installed)
Phillips screwdriver
(if installing a WAN interface card)