Cisco 1603R Quick Start Manual - Page 6

Browse online or download pdf Quick Start Manual for Network Router Cisco 1603R. Cisco 1603R 12 pages. Installation guide

Print Page

(

Install the Router (continued).

C. Connect the router to the wide-area network.

Each of the Cisco 1600 routers supports a different type of wide-area network (WAN) connection. This section

describes how to make these connections. The model number of your router is on the rear panel.

•

Cisco 1601—This page

•

Cisco 1602—Page 7

•

Cisco 1603—Page 8

•

Cisco 1604—Page 9

Cisco 1601 Serial Connection

Note: For this step, you must order a standard serial cable from Cisco. When you order the cable, specify the

type of serial line you are using.

Step 1

Connect one end of the serial cable to the blue SERIAL Ø port on the rear panel.

Step 2

Depending on what is required by your telephone company, do one of the following:

• Connect the other end of the cable to an external device such as an asynchronous modem, a

• Connect the other end of the cable directly to the wall jack.

synchronous modem, or other DCE equipment (as shown in this illustration).

RDY LED

External DCE equipment