Cisco 1721 - VPN Security Router Bundle Quick Start Manual - Page 4
Browse online or download pdf Quick Start Manual for Network Router Cisco 1721 - VPN Security Router Bundle. Cisco 1721 - VPN Security Router Bundle 17 pages. Troubleshooting guide
Also for Cisco 1721 - VPN Security Router Bundle: Hardware Installation Manual (11 pages), Datasheet (12 pages), User Manual (48 pages), Hardware Troubleshooting (12 pages)
Print Page
Figure 1
Connecting the Power Supply
C i s c o
1 7 2 0
W IC
0 O K
Separate
power cord
Power supply
Step 2
Connect the separate power cord to the power socket on the power supply.
Connect the other end of the separate power cord to a power outlet.
Step 3
Turn on the router by pressing the power switch to the on ( | ) position.
Step 4
Step 5
Confirm that the router has power by checking that the PWR LED on the front panel is on.
5
Connect the Router to Your Local Network
You need to provide straight-through Ethernet cables for connecting the router to the local Ethernet network. For more
information on these cables, refer to the "Cabling Specifications" chapter in the hardware installation guide that came with the
router. Follow these steps to connect the router to your local network:
Connect one end of an Ethernet cable to the 10/100 ETHERNET port (the yellow port) as shown in Figure 2.
Step 1
Always connect the Ethernet cable to the Ethernet ports on the router. Accidentally connecting the cable to the
Caution
wrong port can damage your router.
4
C O N
S O L
E
F D X
1 0 0
L N K
1 0 /1 0
SE E
MA NU
0 E T
AL BE
H E R
FO RE
N E T
IN ST
AL LA
TIO N
A U X
W IC
1 O K
Attached
power supply cord
DS U
56 K
+ 5 , +
1 2 , -1
2 V D
C
Power socket