Epson EMP-53 Quick Reference Manual - Page 4
Browse online or download pdf Quick Reference Manual for Projector Epson EMP-53. Epson EMP-53 5 pages. Esc/vp21 command user's guide for business projectors
Also for Epson EMP-53: Read This First Manual (33 pages), Specifications (1 pages), User Manual (28 pages)
Print Page
Useful Functions
Colour mode
The following six preset types of colour mode can be selected by
selection
pressing [Color Mode] on the remote control.
• sRGB
• Presentation
Playback of images and sound can be momentarily paused and then
A/V Mute
resumed each time [A/V Mute] on the remote control is pressed.
Automatic
Automatic setup detects the status of the signals coming from the
Setup
connected computer, and automatically adjusts these signals so that
the optimum images can be obtained.
Troubleshooting
Using the help function
1
Press
on the projector's control panel.
2
Select the item to view.
Press [
3
Accept the selection.
Press [Enter] on the control panel or on the remote control.
4
The help contents will then be displayed.
To clear the display, press
Checking the indicators
These indicators alert you to problems with projector operation. The following tables show what the
indicators mean and how to remedy problems that they indicate.
Refer to "When Having Some Trouble" in the User's Guide for further details.
Power indicator
Status
Problem and remedy
Standby condition
The power cable should only be
Orange
disconnected in this condition.
Projection starts when you press
.
Cool-down in progress
Orange
The projector changes to
standby (indicator lights orange)
after about 20 seconds.
Green
Projection in progress
Warm-up in progress
Green
After warm-up finishes,
projection starts when an image
signal is input.
Printed in Japan
02.10-2.5A(C05)
404064300E
• Normal
• Meeting
• Theatre
] (or the [ ] and [ ] on the remote control).
on the control panel.
Status
Lit
Flashing
(0.5-second
intervals)
(1-second
intervals)
Orange
*1 Contact your dealer for a spare lamp.
*2 For repairs, contact your dealer or the nearest address provided at
• Game
(Warning) indicator
High temperature inside projector (overheating)
The lamp will turn off automatically and projection will
Red
stop. Wait for about 5 minutes, unplug the power
cable and then plug it back in again. Then press
to turn the projector back on.
Lamp problem
Red
Remove the lamp and check if it is broken. If the lamp
is not broken, reinsert it. If the lamp is broken replace
by a new lamp, or contact your local dealer for further
advise.
*1
Red
Internal problem
Stop using the projector and send it for service.
High-speed cooling in progress. If the temperature
rises too high again, projection will stop automatically.
Check that the air filter and air exhaust vent are clear,
and that the internal room temperature is not too high.
"International Warranty Conditions" in Safety Instructions/World-Wide
Warranty Terms .
User's Guide
"Selecting the
Colour Mode"
User's Guide
"A/V Mute"
User's Guide
"Adjusting
Computer Images"
User's Guide
"Troubleshooting"
Help Menu
Help for the image
Help for the sound
Language selection (Language)
If the suggested solution in Help doesn't solve the
problem, unplug the power from the wall outlet and contact
your local dealer.
Select
Enter
[
]:
[
]:
Problem and remedy
Exit
[
]:
Lit
Flashing
*2