ActronAir SWB82C User Manual - Page 5

Browse online or download pdf User Manual for Remote Control ActronAir SWB82C. ActronAir SWB82C 8 pages.

Print Page

Indicators on LCD

Transmission Indicator
The transmission indicator lights when remote
controller transmits signals to the indoor unit.
Mode display
Displays the current operation mode. Including
auto (
applicable to cooling only models), fan (
and back to auto (
Temperature / Timer display
auto cool dry heat
fan
Displays the temperature setting (17 C~30 C). When
you set the operating mode to FAN, no temperature
setting is displayed. And
the ON and OFF settings of the TIMER.
SET TEMP. TIMER ONOFF
Fan speed display
Displays the selected fan speed, AUTO(no display)
and three fan speed levels " " (LOW) "
"
when the operating mode is either AUTO or DRY.
ON/OFF display
sleep follow me lock
run
Displayed by pressing the ON/OFF button.
Press the ON/OFF button again to remove.
Lock Display
Displayed when LOCK mode is activated.
FOLLOW ME Display
Displayed when Follow me function is activated.
Sleep Display
Displayed under sleeping operation.
Press the SLEEP button again to remove.
Note:
All indicators shown in the diagram are for instruction purposes
only. But during the actual operation only the relative functional
signs are shown on the display window.
), c ool (
), dry (
), heat (
) (Not
)
).
O
O
if in the TIMER mode, shows
" (MED)
"
(HIGH) can be indicated. The fan speed is AUTO

How to use the buttons

Auto operation

Ensure the unit is plugged in and power is
ava ilable. T he OPERATION indicator on the
display panel of the indoor unit start s flashing.
1. P ress the
2. P ress the
3. P ress the
ON/OFF
2
4
MODE
SHORTCUT
1
1. In the Auto mode, the air conditioner can logically
FAN
SWING
TEMP
SPEED
3
TIMER
TIMER
SWING
ON
OFF
2. In the Auto mode, you can not switch the fan speed.
TURBO
LED
SLEEP
SELF CLEAN
FOLLOW ME
3. If the Auto mode is not comfortable for you, the
RESET
LOC K
Cooling /Heating/Fan operation
En sure the unit is plugged in and power is
available.
1. Press the
2. Press the
3. Press the
4. Press the
MO DE
butt on to select A uto.
UP /DO WN
but ton t o set the
desired t emperat ure. The temperature can
O
O
be se t wi thin a range of 17 C~ 30 C in 1 C
i ncrements.
ON/OFF
button to start t he air
conditioner.
NOTE
choose the mode of Cooling, Fan, and Heating
by sensing the difference between the actual
ambient room temperature and the set temperature
on the remote controller.
It has already been automatically controlled.
desired mode can be selected manually.
MODE
butt on to select COOL,
HEAT or FAN mode.
UP/DOWN
but tons to set the
desired t emperature.
The temperature can
be set within a range of 17 C~ 30 C in 1 C
O
O
increments.
FAN
button to select the fan speed
in four st eps- Auto, Low, Med,or High.
ON/OFF
button to start the air
conditioner.
NOTE
In the FAN mode, the set temperature is not
displayed on the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
O
O