Cisco 2504 Getting Started Manual - Page 12

Browse online or download pdf Getting Started Manual for Network Router Cisco 2504. Cisco 2504 47 pages. Wireless controller
Also for Cisco 2504: User Manual (11 pages)

Print Page

Installing the Controller

Remove the four rubber feet from the adhesive strip and attach the feet to the recessed areas on the

Step 2

bottom of the unit as shown in

Note

Figure 4

Place the switch on the table or shelf near an AC power source.

Step 3

Note

After the controller is mounted on a shelf or desk, perform the following tasks to complete the

Step 4

installation:

•

For configuration instructions about using the CLI setup program, see the

Step 5

and Power-On Self Test" section on page

Mounting the Controller on a Wall (Rack-Mount Brackets)

The controller can be mounted on a wall using an optional rack-mount bracket kit that is not included

with the controller. You can order a kit with 19-inch rack mounting brackets and hardware from Cisco.

The kit part number is AIR-CT2504-RMNT.

Cisco 2500 Series Wireless Controller Getting Started Guide

We strongly recommend that you attach the rubber feet. Doing so helps prevent airflow

restriction and overheating.

Installing the Rubber Feet on the Bottom of the Controller

Allow 3 inches of space around the controller ventilation openings to prevent airflow restriction

and overheating.

Connecting the Controller Console Port

Securing the Power Adapter Cable

Connecting to the Network

Figure

20.

"Running the Bootup Script