Cisco 2524 - Router - EN Configuration Manual - Page 9

Browse online or download pdf Configuration Manual for Network Router Cisco 2524 - Router - EN. Cisco 2524 - Router - EN 23 pages. Troubleshooting guide
Also for Cisco 2524 - Router - EN: Configuration Manual (23 pages), Overview (10 pages), Preparing To Install (19 pages), Troubleshooting Manual (4 pages)

Print Page

Cisco 2524 - Router - EN Configuration Manual

Enter the enable and virtual terminal passwords:

Step 7

Enter enable password: shovel

Enter virtual terminal password: vterm1

Step 8

Press Return to accept Simple Network Management Protocol (SNMP)

management, or enter no to refuse it:

Configure SNMP Network Management? [yes]: no

In the following example, the router is conﬁgured for AppleTalk, IP, and IPX.

Step 9

Conﬁgure the appropriate protocols for your router:

Configure Vines? [no]:

Configure LAT? [no]:

Configure AppleTalk? [no]: yes

Multizone networks? [no]: yes

Configure DECnet? [no]:

Configure IP? [yes]:

Configure IGRP routing? [yes]:

Your IGRP autonomous system number [1]: 15

Configure CLNS? [no]:

Configure bridging? [no]:

Configure IPX? [no]: yes

Configure XNS? [no]:

Configure Apollo? [no]:

Enter the ISDN BRI switch type for the router. The ISDN switch type appropriate

Step 10

for the router depends on the ISDN provider's equipment. Table 4-1 lists the ISDN

switch types.

Enter ISDN BRI Switch Type [none]: basic-5ess

Configuring the Cisco 2524 and Cisco 2525 Routers 4-9

Configuring the Router