Cisco 2525 Preparing To Install - Page 10

Browse online or download pdf Preparing To Install for Network Router Cisco 2525. Cisco 2525 19 pages. Troubleshooting guide
Also for Cisco 2525: Configuration Manual (23 pages), Configuration Manual (23 pages), Overview (10 pages), Troubleshooting Manual (4 pages)

Print Page
Cisco 2525 Preparing To Install
Preparing to Connect to a Network
4-Wire 56/64-kbps DSU/CSU WAN Module
The 4-wire 56/64-kbps DSU/CSU WAN module includes an RJ-48S port for connection to
a WAN. Cables are not included with the module; however, port pinouts are listed in the
section "4-Wire 56/64-kbps DSU/CSU Module Port Pinouts" in the appendix "Cabling
Specifications for the Cisco 2524 and Cisco 2525 Routers.
Warning
switched 56 cables. If you detach the cable, detach the end away from the router first to
avoid possible electric shock. Network hazardous voltages are also present in the area of
the BRI (RJ-45), fractional T1/T1 (RJ-48C), and switched 56 (RJ-11 or RJ-48S) ports,
regardless of whether power is OFF or ON. (To see translated versions of this warning, refer
to the appendix "Translated Safety Warnings.")
Warning
field by the user in the manufacturer's defined operator access area. Check the equipment
manufacturer to verify/confirm that your equipment is suitable for user-installed
application cards. (To see translated versions of this warning, refer to the appendix
"Translated Safety Warnings.")
Table 2-2 lists network specifications to consider before connecting the module to a
network.
2-10 Cisco 2524 and Cisco 2525 Router User Guide
Network hazardous voltages are present in the BRI, fractional T1/T1, and
This card is intended to be installed in UL- and CSA-certified equipment in the