Cisco 2600 Series Installation Manual - Page 22

Browse online or download pdf Installation Manual for Network Router Cisco 2600 Series. Cisco 2600 Series 22 pages. Configuring adsl wic to support pppoe clients
Also for Cisco 2600 Series: Installation Manual (12 pages), Release Notes (32 pages), Configuration (15 pages), Application Note (41 pages), Datasheet (6 pages), Appendix (15 pages), Overview (13 pages), Quick Start Manual (2 pages), Manual (5 pages)

Print Page

What to Do After Installing Router Hardware

Connecting a Modem to the Auxiliary Port

To connect a modem to the auxiliary port on the router:

Connect a modem to the auxiliary port using the black RJ-45-to-RJ-45 auxiliary cable and the

Step 1

RJ-45-to-DB-25 adapter (labeled MODEM) or the black RJ-45-to-DB-25 adapter cable. (See

Figure

Figure 3-28 Connecting a Modem

Step 2

Make sure that your modem and the auxiliary port on the router are configured for the same transmission

speed (38400 baud is typical) and hardware flow control with Data Carrier Detect (DCD) and Data

Terminal Ready (DTR) operations.

Note

For information on auxiliary port pinouts, refer to the online document Cisco Modular Access Router

Cabling Specifications on the Documentation CD-ROM that accompanied your router package and

on Cisco.com.

What to Do After Installing Router Hardware

After you have installed the router, connect the power cable to the rear panel of the router and the power

source, and then power it ON. (If the router does not power on, proceed to

"Troubleshooting the

For initial configuration information, use the Software Configuration Guide (for Cisco 3600 series and

Cisco 2600 series routers) available on Cisco.com and the documentation CD-ROM that accompanied

your router.

Cisco 2600 Series Routers Hardware Installation Guide

3-22

3-28.)

SERIAL 1

SERIAL 0

CONN

SEE MANUAL BEFORE INSTALLATION

LINK

ETHERNE T 1

ACT

Modem cable

Router.")

SERIAL 1

Cisco 2611

100-240V – 1A

50/60 Hz 47 W

WIC

SERIAL 0

2A/S

WIC

CONN

2A/S

SEE MANUAL BEFORE INSTALLATION

LINK

ETHERNE T 0 ACT

CONSOLE

AUX

AUX port (RJ-45)

Modem

RJ-45 to DB-25 adapter

EIA/TIA-232

Chapter 3

Installing the Router

Appendix A,

OL-2171-02