Cisco 2654T6 Repacking Manual - Page 11

Browse online or download pdf Repacking Manual for Network Router Cisco 2654T6. Cisco 2654T6 26 pages. Cisco systems router owner's manual

Print Page

Appendix A

Repackaging the Router

Removing the Router from the Equipment Rack

Step 1

Step 2

Step 3

OL-17440-01

This section describes how to remove a fully-loaded router from the equipment

rack using the scissor-jack platform. If you elected to empty the chassis before

attempting to remove it from the equipment rack, remove the chassis as described

in the

"Removing and Installing a Chassis" section on page

To remove a fully-loaded router from the equipment rack using the scissor-jack

platform, follow these steps:

Working from the top of the chassis down, remove the screws that secure the

chassis to the mounting flanges on the rack (five screws on each side of the

chassis).

Position the scissor-jack platform in front of the rack-mounting platform installed

in the bottom of the rack, with the screw on the scissor-jack platform facing away

from the front of the router and the back of the scissor-jack platform butted

against the front of the rack-mounting platform.

Use the 3/4-in (19-mm) socket and ratchet wrench to turn the scissor-jack screw

counterclockwise and expand the scissor-jack platform so that the top of the

platform is level with the top of the rack-mounting table under the chassis.

(See

Figure

A-3.)

Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide

Repackaging the Routers

5-53.

A-11