Cisco 2851 - Integrated Services Router User Manual

Browse online or download pdf User Manual for Network Router Cisco 2851 - Integrated Services Router. Cisco 2851 - Integrated Services Router 25 pages. Power up and initial configuration procedures
Also for Cisco 2851 - Integrated Services Router: Installation And Upgrades (21 pages), Datasheet (20 pages), Quick Start Manual (47 pages), Configuration (10 pages)

Print Page

Cisco 2851 - Integrated Services Router User Manual

Cisco 2851 Integrated Services Router FIPS

140-2 Non Proprietary Security Policy

Level 2 Validation

Version 1.3

November 23, 2005

Introduction

This document is the non-proprietary Cryptographic Module Security Policy for the Cisco 2851

Integrated Services Router without an AIM card installed. This security policy describes how the Cisco

2851 Integrated Services Router (Hardware Version: 2851; Firmware Version: 12.3(11)T03) meet the

security requirements of FIPS 140-2, and how to operate the router with on-board crypto enabled in a

secure FIPS 140-2 mode. This policy was prepared as part of the Level 2 FIPS 140-2 validation of the

Cisco 2851 Integrated Services Router.

FIPS 140-2 (Federal Information Processing Standards Publication 140-2—Security Requirements for

Cryptographic Modules) details the U.S. Government requirements for cryptographic modules. More

information about the FIPS 140-2 standard and validation program is available on the NIST website at

http://csrc.nist.gov/cryptval/.

This document contains the following sections:

•

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Introduction, page 1

Cisco 2851 Routers, page 2

Secure Operation of the Cisco 2851 Router, page 17