Cisco 2900 - Catalyst Expansion Module Mounting Instructions - Page 6

Browse online or download pdf Mounting Instructions for Network Router Cisco 2900 - Catalyst Expansion Module. Cisco 2900 - Catalyst Expansion Module 8 pages. Rack-mounting instructions
Also for Cisco 2900 - Catalyst Expansion Module: Datasheet (20 pages)

Print Page

Installing the Chassis in the Rack

Step 3

Step 4

Step 5

Warning

and level.To prevent bodily injury when mounting or servicing this unit in a rack, you must

take special precautions to ensure that the system remains stable. The following guidelines

are provided to ensure your safety:

This concludes the rack-mount installation.

3-6 Catalyst 2900 User Guide

•

If the rear of the chassis will be in the front of the rack, insert the front of the

chassis between the mounting posts, and align the four mounting holes in the

L bracket with the four mounting holes in the equipment rack.

A third person should install the ten-32 x 3/4 inch slotted binder-head mounting

screws through the elongated holes in the L bracket and into the threaded holes in

the mounting post.

Use your tape measure and level to ensure that the chassis is installed straight and

level.

Make sure that your path to the rack is unobstructed.

Use your tape measure and level to ensure that the chassis is installed straight

— This unit should be mounted at the bottom of the rack if it is the only

unit in the rack.

— When mounting this unit in a partially ﬁlled rack, load the rack from

the bottom to the top with the heaviest component at the bottom of the

rack.

— If the rack is provided with stabilizing devices, install the stabilizers

before mounting or servicing the unit in the rack.