Cisco 3620 Quick Start Manual - Page 21

Browse online or download pdf Quick Start Manual for Network Router Cisco 3620. Cisco 3620 37 pages. Rack-mount and wall-mount
Also for Cisco 3620: Owner's Manual (17 pages), Configuration Note (18 pages)

Cisco 3620 Quick Start Manual

WAN, LAN, and Voice Connections

The connections described here are described in detail in the following documents:
• Cisco 3600 Series Hardware Installation Guide
• Cisco Network Modules Hardware Installation Guide
• Cisco Interface Cards Installation Guide
• Cisco Modular Access Router Cable Specifications
To locate these documents, see the "Where to Go Next" section on page 32.
Table 3 summarizes some typical WAN, LAN, and voice connections for Cisco 3600 series routers.
Table 3
WAN, LAN, and Voice Connections
Port or Connection
Port type, color
Ethernet
RJ-45, yellow
T1/E1 WAN
RJ-48C/CA81A, blue
Cisco serial
60-pin D-sub
Cisco Smart serial
Cisco Smart compact
connector, blue
DSL
RJ-11C/CA111A,
lavender
T1 Digital voice
RJ-48C/CA81A, tan
Analog voice FXS
RJ-11, gray
Analog voice FXO
RJ-11, pink
Analog voice E&M
RJ-11, brown
BRI S/T WAN
RJ-48C/CA81A, orange NT1 device or private integrated
(external NT1)
BRI U WAN
RJ-49C/CA-A11, red
(built-in NT1)
BRI S/T LL
RJ-48C/CA81A, orange NT1 device
(external NT1)
CT1/PRI
T1
CT1/PRI-CSU
T1
CTE/PRI
E1
Token Ring
UTP, purple
STP, purple
56/64-kbps DSU/CSU 8-pin modular, blue
1. See the Cisco Modular Access Router Cable Specifications document for information about selecting these cables.
Connected to:
Ethernet hub
Network demarcation (telco
demarc or equivalent)
CSU/DSU and serial network or
equipment
CSU/DSU and serial network or
equipment (For WIC-2T and
WIC-2A/S only)
Network demarcation device for
service provider's DSL interface
Digital PBX
Telephone, fax
Central office, analog PBX
Analog PBX
network exchange (PINX)
ISDN network
External T1 CSU
RJ-48C/CA81A interface
E1 network
Token Ring device
RJ-48S interface
Cable
Straight-through Ethernet
RJ-48 T1
Cisco serial transition cable that
matches the signaling protocol
(EIA/TIA-232, EIA/TIA-449, V.35,
X.21, or EIA/TIA-530) and the serial
port operating mode (DTE or DCE).
RJ-11
RJ-48 T1 cable
RJ-11
RJ-11
RJ-11
RJ-48
RJ-49
RJ-48
DB-15 T1 serial cable
RJ-48 straight-through
DB-15 to BNC, DB-15 to DB-15,
DB-15 to twinax, or DB-15 to RJ-45
RJ-45 Token Ring cable
RJ-48 straight-through
1
21