Cisco 3640 Series Installation Manual - Page 4

Browse online or download pdf Installation Manual for Network Router Cisco 3640 Series. Cisco 3640 Series 10 pages. Rack-mount and wall-mount
Also for Cisco 3640 Series: Owner's Manual (17 pages), Quick Start Manual (37 pages), User Manual (26 pages), Manual (10 pages), Configuration Note (18 pages)

Print Page
Cisco 3640 Series Installation Manual
Safety Recommendations
NEBS/ETSI Intrabuilding Lightning Requirement
Caution
This equipment is suitable for connection to intrabuilding or nonexposed wiring or cabling
only. This cabling must be shielded.

General Safety Practices

Follow these guidelines to ensure general safety:
•
•
•
•
•

Safety with Electricity

Follow these guidelines when working on equipment powered by electricity:
Before working on equipment that is connected to power lines, remove jewelry
Warning
(including rings, necklaces, and watches). Metal objects will heat up when connected
to power and ground and can cause serious burns or weld the metal object to the
terminals.
•
•
•
•
•
•
Center-Mount Bracket Installation Guide for Cisco 3640 Routers
4
Keep the chassis area clear and dust-free during and after installation.
Keep tools away from walk areas where you or others could fall over them.
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf, and roll up
your sleeves.
Wear safety glasses when working under any conditions that might be hazardous to your eyes.
Do not perform any action that creates a potential hazard to people or makes equipment unsafe.
Locate the emergency power-off switch in the room in which you are working. Then, if an electrical
accident occurs, you can quickly shut the power OFF.
Disconnect all power before installing or removing a Cisco router chassis
Do not work alone if potentially hazardous conditions exist.
Never assume that power is disconnected from a circuit. Always check.
Look carefully for possible hazards in your work area, such as moist floors, ungrounded power
extension cables, and missing safety grounds.
If an electrical accident occurs, proceed as follows:
Use caution; do not become a victim yourself.
–
Turn OFF power to the chassis.
–
If possible, send another person to get medical aid. Otherwise, determine the condition of the
–
victim and then call for help.
Determine if the person needs rescue breathing or external cardiac compressions; then take
–
appropriate action.
78-11336-01