Epson EMP-TW100 Setup Manual - Page 9

Browse online or download pdf Setup Manual for Projector Epson EMP-TW100. Epson EMP-TW100 10 pages. Home theatre projector
Also for Epson EMP-TW100: Brochure & Specs (24 pages), User Manual (9 pages), Setup Manual (12 pages)

Epson EMP-TW100 Setup Manual
4
The projector cannot be connected to some types of computer, or projection of images
may not be possible even if actual connection is possible. Make sure that the computer you
intend to use satisfies the conditions given below.
Condition 1: The computer must have a image signal output port.
Condition 2: The display resolution and frequency of the connected computer
To monitor port
8
Turn off the power for both the projector and the computer before connecting them.
If the power for either device is on at the time of connection, damage may result.
Check the shapes of the cable connectors and the device ports before making the
connections. If you try to force a connector to fit a device port with a different shape
or number of terminals, damage to the connector or port may result.
Check that the computer has a port such as an RGB port, monitor port or
CRT port which can output image signals. If the computer has a built-in
monitor, or if using a laptop computer, it may not be possible to connect the
computer to the projector, or alternatively you may need to purchase a
separate external output port. Refer to the documentation for your computer
under a heading such as "Connecting an external monitor" or similar for
further details.
must be within the range specified in the "List of Supported Signal
Resolutions" "List of Supported Signal Resolutions" (p.9)
Some computers may have functions for changing the output resolution.
Refer to the documentation for the computer and change the setting to within
a range given in the list of supported resolutions.
You may need to purchase a separate adapter to connect the
computer to the projector, depending on the shape of the computer's
monitor port. Refer to the documentation for the computer for details.
The commercially available adapter set is required in order to connect
the projector to a Macintosh computer.
Do not bind the power cord together with the DVI-D/DVI-D digital video
cables or DVI analog cable, otherwise it may cause interference in the
projected images or operating errors.
To A-RGB/D-RGB DVI-I port
Digital video cable DVI-D/DVI-D
or
DVI analog cable
(optional)