Epson EMP-TW100 Setup Manual - Page 7
Browse online or download pdf Setup Manual for Projector Epson EMP-TW100. Epson EMP-TW100 12 pages. Home theatre projector
Also for Epson EMP-TW100: Brochure & Specs (24 pages), User Manual (9 pages), Setup Manual (10 pages)
Print Page
Turn off the power for both the projector and the video source before connecting them.
3
If the power for either device is on at the time of connection, damage may result.
Check the shapes of the cable connectors and the device ports before making the
connections. If you try to force a connector to fit a device port with a different shape or
number of terminals, a malfunction or damage to the connector or port may result.
Refer to the Optional Accessories appendix in the separate User's Guide for details of the
optional cables.
Projecting Component Video Images
If connecting using a component video cable (commercially-available)
To video output port
If connecting using a component video cable (optional)
To video output port
6
Component video cable
(commercially-available)
Component video cable (optional)
If more than one peripheral device is being connected to the projector,
make the connections and then change the Input A and Input B commands
in the Advanced environment setting menu to "YCbCr" or "YPbPr" to match
the signals from these devices. ("Advanced" menu in User's Guide )
For HDTV (750p or 1125i), "YPbPr" will be selected regardless of the above
setting.
For SDTV(525i,625i), "YCbCr" will be selected regardless of the above setting.
Green
Blue
Red
To Input B port
To Input A port