Cisco 3845 - Security Bundle Router Quick Start Manual - Page 5

Browse online or download pdf Quick Start Manual for Network Router Cisco 3845 - Security Bundle Router. Cisco 3845 - Security Bundle Router 40 pages. Integrated services routers
Also for Cisco 3845 - Security Bundle Router: Non Proprietary Security Policy (30 pages), Quick Start Manual (38 pages), Troubleshooting Manual (15 pages)

Print Page

Cisco 3845 - Security Bundle Router Quick Start Manual

Items Included with Cisco 3800 Series Routers

Your router package should include the following items in addition to the router:

• RJ-45-to-DB-9 console cable and RJ-45-to-DB-25 modem cable for management access

• One 2.54-mm (0.100 in.) centerline, single row shunt

• Ground lug and two mounting screws; AC power cord with AC-powered routers

• One pair of rack-mount brackets with screws for 19-inch (48.26-cm) rack (screws are for bracket-to-chassis attachment)

• One pair of brackets for 19-inch (48.26-cm) rack (screws are for bracket-to-chassis attachment)

• Ethernet cable for LAN interface

• Cisco product registration card; Cisco.com card

• Cisco 2800 Series and Cisco 3800 Series Integrated Services Routers Regulatory Compliance and Safety Information

document

• Cisco Router and Security Device Manager (SDM) Quick Start Guide document

• Cisco 3800 Series Integrated Services Routers Quick Start Guide (this document)

Items Not Included

Individual items in this list may be required for your application:

• PC with HyperTerminal or similar terminal emulation program, or a modem for remote administrative access

• Cables for WAN interfaces, voice interfaces, additional LAN interfaces

• Cable ties, number 2 Phillips screwdriver

• Four screws for installing the router in a rack (supplied with racks)

• 23-inch (58.42-cm) rack mount brackets

• 23-inch (58.42-cm) rack mount brackets for European Telecommunication Standards Institute (ETSI) racks (can be ordered

from Cisco)

• Other typical equipment, such as channel service unit/data service unit (CSU/DSU); NT1 device for ISDN-BRI S/T; Ethernet

switch

Install Chassis

This section contains basic installation procedures. For more detailed installation instructions, see the Cisco 3800 series

hardware installation documentation at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/3800/hw/index.htm

Safety Information

For safety information you must know before working on your Cisco router, see the Cisco 2800 Series and Cisco 3800 Series

Regulatory Compliance and Safety Information document that accompanied this device.

This document contains translations of the warnings that appear in this quick start guide.