ActronControls LE75V Operating Instructions - Page 2

Browse online or download pdf Operating Instructions for Temperature Controller ActronControls LE75V. ActronControls LE75V 2 pages. A quality leasam air conditioning control system

Print Page
LE75
3
CONT
HI
FAN
4
MID
LOW
TIMER
5
LE75V
3
SET
TEMP
CONT
HI
FAN
4
MID
MID
LOW
5
AUTO
ON
1
HEAT
COOL
OFF
2
6
TIMER
TIMER
6
AUTO
ON
1
HEAT
COOL
OFF
2
LE75 OPERATING INSTRUCTIONS
1
Press the ON button to start the air conditioning system
AUTO mode will automatically select heat or cool depending on temperature.
Press ON again to select HEAT, the system will operate in heat mode only.
Press ON again to select COOL, the system will operate in cool mode only.
Press ON again to go back to AUTO thermostat mode.
2
Press OFF button to stop the air conditioning system.
3
Display temperature SETPOINT i.e. desired temperature setting.
4
Press FAN button to select fan speed, keep pressing FAN to cycle through fan
settings i.e.
HIGH, MID, LOW, CONT HIGH, CONT MID, CONT LOW.
CONT stands for continuous operation of the fan, usually used in cooling mode.
5
Press and hold UP or DOWN arrow to select the desired temperature setting
6
Press the TIMER button to activate the delay timer.
e.g. before going to bed press TIMER, while it is flashing press UP or DOWN
button to set 2.0 then the air conditioning system will stop after 2 hours.
If the system is ON, set TIMER to STOP the system after the set duration.
If the system is OFF, set TIMER to START the system after the set duration.
DISPLAY ROOM TEMPERATURE
"Quick Press" UP button to display the room temperature for 3 seconds.
VENTILATION MODE
With the system off, Press the FAN button to circulate the air.
Press OFF to STOP the fan.
LED INDICATORS
HI
MAXIMUM FAN SPEED
MID
MEDIUM FAN SPEED
LOW
MINIMUM FAN SPEED
CONT
CONTINUOUS FAN
DPO-LE75&VOP-1
AUTO
AUTOMATIC MODE
RED
ORANGE
HEAT
HEATING OPERATION
ORANGE
RED
COOL
COOLING OPERATION
GREEN
GREEN
TIMER
TIMER ACTIVATED
ORANGE
RED
E&OE SUBJECT TO CHANGE WITHOUT NOTICE. AUG 2008