Samsung 29A7 Owner's Instructions Manual - Page 37

Browse online or download pdf Owner's Instructions Manual for TV Samsung 29A7. Samsung 29A7 40 pages. Samsung cs29a200: user guide
Also for Samsung 29A7: Owner's Instructions Manual (40 pages), Owner's Instructions Manual (44 pages), Owner's Instructions Manual (40 pages)

Print Page

Automatic Degaussing to Remove Colour Patches

A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the

television manually.

If you move the television to a different position and color patches appear on the screen, you must:

Switch the television off by pressing the "POWER

Unplug the television from the wall socket

Leave the television power-off (stand-by) for about 30 minutes so that the automatic degauss

function can be activated, and then press the POWER

If your television will be left unattended, press the "POWER

television off.

Before contacting Samsung after-sales service, perform the following simple checks.

If you cannot solve the problem using the instructions below, note the model and serial number of the

television and contact your local dealer.

No sound or picture

Normal picture but no sound

No picture or black and white picture

Sound and picture interference

Blurred or snowy picture,

distorted sound

Remote control malfunctions

" (ON/OFF) button on the front panel

button on the remote control.

Check that the mains lead has been connected to a wall socket.

Check that you have pressed the POWER

Check the picture contrast and brightness settings.

Check the volume.

Check whether the MUTE

remote control.

Adjust the colour settings.

Check that the broadcast system selected is correct.

Try to identify the electrical appliance that is affecting the television

and move it further away.

Plug your television into a different mains socket.

Check the direction, location and connections of your aerial.

This interference is often due to the use of an indoor aerial.

Replace the remote control batteries.

Clean the upper edge of the remote control (transmission window).

Check the battery terminals.

" (ON/OFF) button to turn your

(ON/OFF) button.

button has been pressed on the

ENG