C.T.M. HS-2750 User Manual - Page 15

Browse online or download pdf User Manual for Wheelchair C.T.M. HS-2750. C.T.M. HS-2750 20 pages.

Print Page
HS-2750
Please be aware that the travelling range of your power chair is impacted by how fast the batteries are
discharged. This will depend on many circumstances, such as ambient temperature, condition of the
surface of the road, tyre pressure, weight of the driver, driving environment (inclines etc.) and utilisation
of your lighting system if fitted. We recommend that you test your local ride with a family member to
ensure a safe journey.
5-3 BATTER GAUGE OPERATION
The battery gauge comprises five different LEDs (1 x red, 2 x orange, 2 x green), situated above
the remote module's horn button.
※The number of LEDs lit depends on the status of the battery, as shown below.
Battery Gauge
Fully charged. This level is set by the Battery Gauge Maximum parameter.
Operate normally. Pay attention to the battery voltage.
Operate normally. Pay attention to the battery voltage.
Consider charging battery
Battery needs charging. This level is set by the Battery Gauge Minimum parameter.

6.TROUBLE SHOOTING

6-1 STATUS INDICATOR ERRORS
Figure 19
The status indicator
6-2 THE BATTERY GAUGE INDICATION
※Always check number of flashes to prevent battery running down during driving.
High voltage warning
Figure 20
Low voltage warning
Figure 21
If, when powered up, there is an error with the system, then the status
indicator will flash red. The number of flashes will indicate the type of
error. These are described in the table below.
Flash code
Error description
1
Remote / joystick error
2
Network or configuration error
3
Left motor error
4
Right motor error
5
Left park brake error
6
Right park brake error
7
Module error (other than Remote)
For more information about the error, and what to do about it, open the
logs within one of the programming & diagnostic tools.
A high voltage warning is indicated by all LEDs on, and the green
LEDs flashing. This occurs when the battery voltage level has risen
above the high voltage warning set-point.
A low voltage warning is indicated with the left-most LED flashing.
This occurs when the battery voltage level has decreased below
its low voltage warning set-point. Charge the battery immediately.
Status
Please contact your authorized dealer for any malfunction.
13
User Manual