ACDelco I-7005T Owner's Manual - Page 11

Browse online or download pdf Owner's Manual for Battery Charger ACDelco I-7005T. ACDelco I-7005T 15 pages. Fully automatic microprocessor controlled battery charger for 12-volt lead acid batteries

Print Page

• Optimal Charging/remnant Time (CCA)

button - Use this button to select the

battery CCA value in order to proceed with

optimized charging. The remnant time will

be displayed.

When the CCA button is pressed once, the

indicator will display "CCA" and then switch

to "50" in approximately 1 second.

When the CCA button is pressed again

within 5 seconds, the indicator will display

"100". If the Battery Charger does not

receive any further input from the CCA

button within 5 seconds, it will automatically

proceed to REMNANT TIME charging mode

with the OPTIMIZED charging current

selected by the microprocessor based on

the input value of 100 CCA.

Note:

• The CCA settings that can be input by the

user range from 50 to 999 at intervals of

50 (e.g.: 50, 100, 150, 500, 900, 950, up to

999).

• If the battey rating is larger than 999 CCA,

the Remnant Time displayed may not be as

accurates smaller rating batteries.

When the Battery Charger is in REMNANT

TIME charging mode, the display will show

"Battery Capacity %" (e.g. 10, 20, ..., 90,

FUL). User can press the CCA button in

order to display the remaining charging time

on the indicator.

OPERATION

• Remaining charging time is displayed in

"X.X" h (number of hours remaining in

the battery charging time) for 5 seconds,

and then return to displaying the battery

voltage.

• During the OPTIMAL CHARGING process,

press the "CCA" button will toggle the

display to show between "Battery Capacity

%" and Remaining charging time.

• During the REMNANT TIME charging

process, the CCA value can only be reset

by restarting the Battery Charger . In order

to reset the Battery Charger, press the

"ON/OFF" button.

• During the REMNANT TIME charging

process, pressing the Select button, the

Volt/Bat% button, or the Function Key button

will have no effect on the Battery Charger.

• Once charging is completed, the indicator

will display the word "FUL".

NOTE: The Remnant Time is an approximate

index, its accuracy subject to battery's

condition and age.

To avoid personal injury and/or property

damage:

• STAY CLEAR of fan belts and pulleys!

• NEVER charge a running vehicle!

• ONLY test 12 volt negative ground

systems.

WARNING