C4i HDC-EHB70ARC User Manual - Page 8

Browse online or download pdf User Manual for Extender C4i HDC-EHB70ARC. C4i HDC-EHB70ARC 10 pages. 18gbps hdbaset extender (70m) with arc

Print Page
No.
Name
SERVICE
3
DC 24V
4
5
HDBT IN
Link Signal
6
Indicator
(Green)
Data Signal
Indicator
7
(Orange)
8
HDMI OUT
9
SPDIF IN
10
IR IN
11
IR OUT
12
RS-232
Firmware update port.
DC 24V/1A power input port.
Note that the extender supports POC function, it means that either
Transmitter or Receiver is connected to 24V/1A power supply, the other
doesn't need power supply.
RJ45 connector for connecting the HDBT OUT port of
Transmitter with CAT6/6a cable.
▪ Illuminating: Transmitter and Receiver are in good connection
status.
▪ Flashing: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
▪ Illuminate: HDMI signal with HDCP.
▪ Flash: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
HDMI signal output port. Connect to HDMI display devices
with HDMI cable.
Optical fiber audio signal input port.
Connect to the IR receiver cable. The IR signal will send
to the IR OUT port of the Transmitter.
Connect to the IR blaster cable, the IR signal is from IR
IN port of the Transmitter.
3-pin Phoenix connector for RS-232 command transmission.
The RS-232 command will pass-through between the
Transmitter and Receiver.
Function Description
6 / 8