Ace ac-29 Owner's Manual - Page 2

Browse online or download pdf Owner's Manual for Accessories Ace ac-29. Ace ac-29 13 pages. Two-note non-electric door chime – with viewer

Print Page

mounting chime assembLy

1. Position chime assembly over push

button shaft and viewer (see Figure 2).

2. Verify chime assembly is parallel to edge

of door.

3. Attach the top and bottom of chime as-

sembly securely using mounting screws

provided (see Figure 2).

oPeration

1. Verify door chime operation by pressing

push button. The chime will sound two

(2) notes.

2. If door chime does not operate prop-

erly, check push button and chime

assemblies. Both assemblies must be

parallel to the door edge for proper chime

operation.

3. If necessary, adjust one or both as-

semblies.

Push Button As-

sembly (Shown on

Outside of Door)

Chime Assembly

Mounting Screws

Figure 2 - Mounting Chime Assembly and Attaching Chime Cover

Cover Mounting Tab

Push Button Shaft

attaching chime cover

1. To insure proper clearance when the

cover is attached, break off the excess

push button shaft. IMPORTANT: To avoid

breaking plastic chime assembly parts,

use needle-nosed pliers to hold shaft

securely while bending shaft back and

forth to remove (see Figure 2, View A).

2. Place slot in chime cover over tab on top

of chime assembly.

3. Press bottom of chime cover onto

chime assembly until cover "snaps" into

place.

Needle-Nosed Pliers

Break Off Excess

Cover

Mounting

Chime Cover

view a

Slot

598-1225-01