Cisco NCS 4000 Series Unpacking, Moving, And Securing Manual - Page 32
Browse online or download pdf Unpacking, Moving, And Securing Manual for Network Router Cisco NCS 4000 Series. Cisco NCS 4000 Series 40 pages. Network convergence system
Also for Cisco NCS 4000 Series: Troubleshooting Manual (44 pages)
Print Page
Chapter 4
Securing the Chassis
Preparing to Mount the Chassis in a Rack
Figure 4-7
Attaching Aid Brackets to the Rack
Once the chassis has been installed, remove the aid brackets. Loosen the two screws from the aid
Step 2
brackets and take off the rack.
Keep the aid brackets in case of future chassis relocation.
Tip
To accommodate equipment racks with different mounting hole patterns, the aid brackets have groups of
screw holes on either side.
The mounting holes in the aid brackets are spaced so that one mounting hole in each hole group aligns
with a corresponding hole in the equipment rack. By using the corresponding mounting hole (in the same
hole group) on the opposite side of the rack, you can keep both the aid brackets leveled.
When you are installing the chassis in a rack, leave the filler cards in place to provide the chassis with
Caution
enough support to keep it square during the procedure.
Cisco Network Convergence System 4000 Series Unpacking, Moving, and Securing Guide
4-8