Cisco NCS 4000 Series Unpacking, Moving, And Securing Manual - Page 37
Browse online or download pdf Unpacking, Moving, And Securing Manual for Network Router Cisco NCS 4000 Series. Cisco NCS 4000 Series 40 pages. Network convergence system
Also for Cisco NCS 4000 Series: Troubleshooting Manual (44 pages)
Print Page
Chapter 4
Securing the Chassis
Figure 4-12
Prerequisites
•
Make sure that the rack is level and bolted to the floor.
•
Make sure that the mounting brackets are installed on the chassis.
•
Make sure that the aid brackets are installed on the rack.
Required Tools and Equipment
Number 1 Phillips screwdriver
•
Mechanical lifting device, such as a scissor lift or other suitable lifting device
•
Installation kit, shipped with the chassis, contains installation aid brackets and screws (Cisco
•
product number NCS4K-INST-KIT=)
Steps
To mount the chassis in the rack, follow these steps:
Step 1
With the chassis on the lift, align the chassis with the rack.
Using your mechanical lift, raise the chassis to the height of the rack's installation aid brackets.
Step 2
Chassis Mounting Hardware Ready for Rack Mounting
Cisco Network Convergence System 4000 Series Unpacking, Moving, and Securing Guide
Mounting the Chassis into a Rack
4-13