Cisco NCS 4200 Series Configuration Manuals - Page 14
Browse online or download pdf Configuration Manuals for Network Router Cisco NCS 4200 Series. Cisco NCS 4200 Series 30 pages. 1 port oc-48/ 4 port oc-12/oc-3 + 12 port t1/e1 + 4 port t3/e3 cem interface module configuration guide, cisco ios xe fuji 16.7.x (cisco ncs 4200 series)
Also for Cisco NCS 4200 Series: Configuration Manual (36 pages)
Print Page
Configuring Cross-connect on T3 VCoP Smart SFP
enable
configure terminal
interface cem 0/0/10
cem0
xconnect10.10.10.10 204 encapsulation mpls
end
Verifying VCoP Smart SFP Configuration on T3
Use the show cem circuit command to verify the VCoP smart SFP on T3 mode.
Device# show cem circuit interface cem0/0/10
CEM0/0/10, ID: 0, Line: UP, Admin: UP, Ckt: ACTIVE
Controller state: up, CEP state: up
Idle Pattern: 0xFF, Idle CAS: 0x8
Dejitter: 5 (In use: 0)
Payload Size: 783
Framing: Unframed
CEM Defects Set
None
Signalling: No CAS
RTP: No RTP
Ingress Pkts:
64000
Egress Pkts:
64000
CEM Counter Details
Input Errors:
0
Pkts Missing:
0
Misorder Drops:
0
Error Sec:
0
Unavailable Sec: 0
Pkts Malformed:
0
Use the show controllers command to verify the controller configuration of VCoP smart SFP on T3 mode
Device# show controllers t3 0/0/10
T3 0/0/10 is up.
Hardware is 12xGE-4x10GE-FIXED
Applique type is Channelized T3/T1
No alarms detected.
Framing is Unframed, Line Code is B3ZS, Cablelength Short less than 225ft
BER thresholds:
SF = 10e-10
Clock Source is internal
Equipment customer loopback
Data in current interval (0 seconds elapsed):
0 Line Code Violations, 0 P-bit Coding Violation
0 C-bit Coding Violation, 0 P-bit Err Secs
0 P-bit Severely Err Secs, 0 Severely Err Framing Secs
0 Unavailable Secs, 0 Line Errored Secs
0 C-bit Errored Secs, 0 C-bit Severely Errored Secs
0 Severely Errored Line Secs
0 Far-End Errored Secs, 0 Far-End Severely Errored Secs
0 CP-bit Far-end Unavailable Secs
0 Near-end path failures, 0 Far-end path failures
0 Far-end code violations, 0 FERF Defect Secs
0 AIS Defect Secs, 0 LOS Defect Secs
0 Bipolar Violations/Excessive Zero Errors
0 Code Violations Path Errors, 14 B3 Errors
14
Dropped:
Dropped:
Output Errors:
Pkts Reordered:
JitterBuf Underrun:
Severly Errored Sec: 0
Failure Counts:
JitterBuf Overrun:
SD = 10e-10
0
0
0
0
0
0
0