Cisco NCS 5500 Series Manual - Page 3

Browse online or download pdf Manual for Network Router Cisco NCS 5500 Series. Cisco NCS 5500 Series 25 pages. Connect router to the network
Also for Cisco NCS 5500 Series: Configuration Manual (19 pages), Connection Manual (24 pages)

Print Page
Cisco NCS 5500 Series Manual
Connect Router to the Network
Figure 1: NCS 55A1
Figure 2: NCS 55A2
1
Follow this procedure to connect a data terminal to the console port.
Before you begin
• The router must be fully installed in its rack, connected to a power source, and grounded.
• The necessary cabling for the console, management, and network connections must be available.
Step 1
Set your terminal to these operational values: 115200 bps, 8 data bits, no parity, 2 stop bits (115200 8N1).
Step 2
Attach the terminal end of the cable to the interface port on the data terminal.
Management Ethernet
port
• An RJ-45 rollover cable and DB9F/RJ-45 adapter are provided in the router accessory kit.
• Network cabling should already be routed to the location of the installed router.
Connect to the Console Port
2
Console port
Connect Router to the Network
3