CAB HS 150 Instructions For Use Manual - Page 2
Browse online or download pdf Instructions For Use Manual for Label Maker CAB HS 150. CAB HS 150 6 pages. Label dispenser
Also for CAB HS 150: Instructions For Use Manual (12 pages)
Print Page2
The HS 150 is a compact unit designed to
dispense rolled self-adhesive label stock. The
machine processes label-rolls of up to 147 mm
width and 240 mm external diameter.
The minimum core diameter is 40 mm.
The unit can be switched between 230 V and
115 V mains power supply.
1. Technical Data
Label Width
Label Length
Roll Diameter
Label Rewinder
Core Diameter
Backing Strip Winding Dia.
1
Setting of Label Length
Counter
Key
Mains Switch
Mains Supply
Operation Temperature
Transport and Storage Temp.
Humidity
Approvals
Noise Level
2
Power Consumption
Dimensions
Weight
2. Contents of Delivery
1 - HS 150 Half-Automatic Label Dispenser
2 - Mains cable
3
3 - 2 Fuses 500 mA Slowblow / 250V
4 - Operating Instructions
3. Safety Precautions
• Before switching ON, verify that the mains
• The HS 150 operates from mains voltage and
• During operation, the rotating rewinder axle is
4
15 to 300 mm (0.59" - 11.81")
internal or external as required
188 mm x 250 mm x 240 mm
(7.40"(H) x 9.84"(W) x 9.44"(D))
(for the usage with 115 V)
supply module is switched to the relevant sup-
ply voltage.
therefore may not be opened.
freely accessible. Take care when switching
ON. The machine sets in motion immediately
and continues until the first label is ready to be
dispensed.
19 to 147 mm (0.48" - 5.79")
max. 240 mm (9.44")
min. 40 mm. (1.57")
max. 100 mm (0.93")
via micro-switch feeler
Four position LED display
Reset to „0"
ON/OFF
230 V 50 Hz fuse 250 mAT
115 V 60 Hz fuse 500 mAT
10°C to 35°C
(50°F. to 95°F)
-20°C to +35°C
(-4°F to +95°F)
10%to 85% non-condensing
DIN VDE 0805 Class 1
60 dB(A)
approx. 40 W.
Approx. 10 lbs. (4.4 Kg.)