Cisco Nexus 3000 series Installation Manual - Page 8
Browse online or download pdf Installation Manual for Network Router Cisco Nexus 3000 series. Cisco Nexus 3000 series 12 pages. Switch chassis
Also for Cisco Nexus 3000 series: Hardware Installation Manual (6 pages), Product White Paper (7 pages), Installing (8 pages), Quick Start Manual (14 pages), Manual (16 pages)
Print Page
Grounding the Chassis
c) Holding the chassis level, insert two screws (12-24 or 10-32, depending on the rack type) in each of the two front
rack-mount brackets (using a total of four screws) and into the cage nuts or threaded holes in the vertical rack-mounting
rails (see the following figure).
Figure 4: Attaching the Switch to the Rack
1
Fasten the chassis to the front of the rack with two
12-24 or 10-32 screws on each side.
2
Front-mount bracket.
d) Tighten the 10-32 screws to 20 in-lb (2.26 N·m) or tighten the 12-24 screws to 30 in-lb (3.39 N·m).
Grounding the Chassis
The switch is grounded when you connect the chassis and the power supplies to the earth ground in the
following ways:
• You connect the chassis (at its grounding pad) to the data center ground. If the rack is fully-bonded and
Cisco Nexus 9372TX ACI-Mode Switch Hardware Installation Guide
8
grounded, you can ground the switch by connecting it to the rack.
3
Mounting rails on rack or cabinet posts.
Installing the Switch Chassis