Cisco SCE8000 GBE Removal And Replacement Procedures - Page 28
Browse online or download pdf Removal And Replacement Procedures for Network Router Cisco SCE8000 GBE. Cisco SCE8000 GBE 36 pages. 10gbe platform
Also for Cisco SCE8000 GBE: Quick Start Manual (25 pages), Configuration Manual (18 pages), Installing (21 pages)
Print Page
Installation and Upgrade Procedures for Dual Cisco SCE 8000-SCM Modules
Downgrading Dual Cisco SCE 8000-SCM Modules
Downgrading the system to a version earlier than 3.6.0 is not permitted on a system with dual Cisco SCE
8000-SCM modules.
Perform the following steps to downgrade:
Step 1
At the SCE# prompt, enter reload shutdown and press Enter and then turn off the
Cisco SCE 8000 10 GBE platform.
Step 2
Remove the Cisco SCE 8000-SCM module in slot 2.
Step 3
Turn on the Cisco SCE 8000 power.
Step 4
Perform the downgrade.
Upgrading Dual Cisco SCE 8000-SCM Modules
Use the Upgrade wizard in the SCA BB console to upgrade a system with dual Cisco SCE 8000-SCM
modules the same as for a single Cisco SCE 8000-SCM module system. See the
SCE Using the SCE Software Upgrade Wizard
Broadband User
Cisco SCE8000 10GBE Installation and Configuration Guide
9-28
Guide.
Chapter 9 Removal and Replacement Procedures
section in the
Cisco Service Control Application for
How to Upgrade the
OL-26784-02