Cisco SG 300-10P Quick Start Manual - Page 14

Browse online or download pdf Quick Start Manual for Network Router Cisco SG 300-10P. Cisco SG 300-10P 17 pages. Managed switches
Also for Cisco SG 300-10P: Quick Start Manual (17 pages), Datasheet (14 pages), Specifications (2 pages), Quick Setup Manual (10 pages), Quick Start Manual (18 pages), Quick Start Manual (17 pages)

Print Page

Console—The Console port is where you can connect a serial cable to a

computers serial port for configuration using a terminal emulation program.

Returning the Device to the Factory

Default Settings

To use the Reset button to reboot or reset the managed switch, do the

following:

• To reboot the managed switch, press the Reset button for less than 10

seconds.

• To restore the managed switch configuration to the factory default

settings:

1. Disconnect the managed switch from the network or disable all

DHCP servers on your network.

2. With the power on, press-and-hold the Reset button for more than

10 seconds.

Cisco 300 Series Managed Switches