Cisco SLM224G - Small Business Smart Switch Quick Start Manual - Page 5
Browse online or download pdf Quick Start Manual for Network Router Cisco SLM224G - Small Business Smart Switch. Cisco SLM224G - Small Business Smart Switch 13 pages. Smart switch
in half- and full- duplex modes. Auto-sensing technology enables each port
to automatically detect the speed of the device connected to it (10 Mbps
or 100 Mbps), and adjust its speed and duplex mode accordingly.
miniGBIC — (1-2) The miniGBIC (gigabit interface converter) port is a
connection point for a miniGBIC expansion module, so the switch can be
uplinked to another switch by using a fiber optical link. The miniGBIC port
provides a link to a high-speed network segment or individual workstation
at speeds of up to 1000 Mbps.
Back Panel
The power port is located on the back panel of the switch.
2
Installing the Switch
There are two ways to physically install the switch, either set the switch on
its four rubber feet for desktop placement or mount the switch in a rack.
Before you begin the installation, make sure that you have the following
equipment and services:
• Tools for installing the hardware
• Cables for WAN interfaces, desktop systems, and fiber connectivity
devices, or for connecting additional additional LAN interfaces
• Computer with Microsoft Internet Explorer 6.0 or later, or Mozilla Firefox
version 3 or later for using web-based system management tools
Placement Tips
• Make sure that the switch is accessible and that the cables can be
connected easily.
• Keep cabling away from sources of electrical noise, power lines, and
fluorescent lighting fixtures.
• Do not stack free-standing switches more than four units high.
4
Cisco Small Business SLM Series Smart Switch Installation Guide