Cisco Small Business Pro SRP527W User Manual - Page 3
Browse online or download pdf User Manual for Network Router Cisco Small Business Pro SRP527W. Cisco Small Business Pro SRP527W 21 pages. Dot (digital office technology)
Also for Cisco Small Business Pro SRP527W: Quick Start Manual (17 pages), User Manual (27 pages)
Print Page
Section 1. What's in the Box
Section 2. Setting up your system
Running the Self-Install CD
Installing your router
Setting up your Wi-Fi network
Setting up Broadband Backup
Section 3. Remote Working
(working away from your office)
Section 4. Troubleshooting
Section 5. Acronyms, Abbreviations
and Glossary
Previous
Next
Section 2.
Setting up your system
Important information
You must use the included Self-Install CD to set up or change your
service. The CD is specially designed to set up your equipment.
Depending on your setup, this will take 30 to 60 minutes,
and you'll need approximately 150 MB of free space on
your computer.
Before you get started
Disconnect your computer from any existing networks,
including Wi-Fi networks.
Have on hand the following items:
• the Self-Install CD;
• the Despatch Letter (containing the mobile number for the
Broadband Backup, if ordered);
• your equipment (as described in the "Despatch Letter");
• included cables (and additional ones: for example, if you'll
need a cable longer than 2 metres);
• a printout of the DOT Configuration Summary email that you
received when you signed up for DOT;
• a computer that you have administrative rights on, with the
following minimum system requirements:
− 128 MB RAM;
− 150 MB of free hard disk space;
− Windows
XP SP2 or later, or Mac
OS X v10.4 or later.
®
®
Running the Self-Install CD
To run the Self-Install CD:
1. Insert the CD into your computer's CD drive.
Windows: The installation will begin automatically. If the
installation does not begin automatically, navigate to the
CD drive on your computer and double-click the file called
setup.exe.
Mac: A DOT icon will appear on your desktop. Double click it
to begin the installation.
2. Follow the on-screen instructions to install and
customise your equipment.
Installing your router
Install the router as per the instructions on your Self-Install
CD. When installed and operating correctly, it will display
lights on its front panel, as described in Table 1. It should be
noted that not all the lights will appear flashing or on at the
same time.
Table 1 Cisco Router function lights
Label
Light – solid green
Light – flashing
POWER/
When the router has
When the router
SYS
successfully booted
is booting.
and is ready to use.
LAN
When a connection is
When there is activity
(1–4)
established to your PC
on the LAN port.
or Phone
Phone
When a connection
When there is activity
(1–2)
is established to your
on the Phone port.
EFTPOS, FAX or Integrated
Access Device.
DSL CD
When the router is
When an ADSL
connected to the Telstra
service is detected
Broadband network
DSL
This light will either be
When there is ADSL
Data
flashing or OFF. If turned Off,
activity on the line
there is no ADSL activity