CAB SQUIX CSQ 400 Assembly Instructions Manual - Page 12

Browse online or download pdf Assembly Instructions Manual for Cutter CAB SQUIX CSQ 400. CAB SQUIX CSQ 400 20 pages.

Print Page

Operation

3.2

Standard Operation

 Switch on the printer.

The cutter performs a synchronization action.

Note!

To operate the cutter with continuous material in the printer menu

Setup - > Labels - > Label sensor the setting Continuous media has to be

selected. Otherwise no synchronization cut is carried out.

 Press

cut off.

That synchronization is not necessary when the printhead was not opened

between print jobs, even if the printer was powered off between print jobs.

 Send a print job.

All labels in the job will be printed without stopping and be cut as chosen in

the software : after each label, after a specific quantity of labels, or at the

end of a print job.

Note!

Between the print jobs a direct cut can be released by pressing

Note!

In case the material do adhere in follow of electrostatic charge it's

possible to mount an antistatic brush (Part No. 5977339) on the

printer.

3.3

In the "Cut on Demand" mode the print job will be split into steps, which can

be released separately.

 Choose Printing > Print on demand = On.

 4. Printer Configuration.

 Send a print job.

 Press

The first label will be printed and cut.

 Press

Note!

The

START signal when the I/O interface is installed on the printer.

 Configuration Manual of the printer.

. For synchronization the media will be moved forward and

on the control panel.

again to print and cut the next label.

function can be released alternatively by an external