Cisco uBR924 Installation And Startup - Page 12

Browse online or download pdf Installation And Startup for Network Router Cisco uBR924. Cisco uBR924 34 pages. Cable access router

Print Page
Initialize the Router (continued)
LED
Label
OK
ACT
1, 2, 3 or 4
V OK
10
V1
V2
LINK
DS
US
DSNR
Description
On = Power-on and self-test have completed successfully, the system image has been booted, and the
system is operational.
Blink = After power-on and self-test have completed successfully, LED blinks as the system image is
booted.
Off = No power
On = Cable activity
Off = No activity
On = Ethernet link up for the port
Blink = Activity on Ethernet link for the port
Off = Ethernet link down for the port
On = Healthy VoIP system for a Cisco uBR924 cable access router configured to support voice
Off = VoIP system problem or the router has switched over to the PSTN
On = Call in progress on the voice port for a router configured to support voice
Off = No call
On = Call in progress on the voice port for a router configured to support voice
Off = No call
On = Cable (RF) connection up
Blink = Router searching for a downstream frequency
Off = Cable (RF) connection down
On = Router locked to a downstream frequency
Off = Router not locked to a downstream frequency or the router has not yet located a digital signal
On = Router has established communications with the CATV headend per DOCSIS
Off = Router has not completed secondary ranging
On = Receiving quality, downstream signal 5 dB above the downstream lock threshold
Off = Receiving low downstream signal strength or quality