Cab Technology PCU4/2 Operator's Manual - Page 19
Browse online or download pdf Operator's Manual for Cutter Cab Technology PCU4/2. Cab Technology PCU4/2 20 pages. Perforation cutter
Print Page6
Maintenance
9
10
1 - right
4. Check the position of the clock wheel (11).
•
If the clock wheel is in the right position 1, the edge (10) of the clock wheel
(11) is located in the area of the marking (9).
•
If the clock wheel is in position 2 or 3 turn the circular blade to reach the
position 1 :
•
Loosen screws (12) and remove upper cover sheet (13).
•
Loosen screws (14) and remove support (15) incl. lower cover
sheet (16).
•
Turn the circular blade by one or two full turns, until the planar area
(8) of the blade axle becomes parallel to the base plate (7) again
and the clock wheel reaches the position 1.
•
Re-mount upper cover sheet (13) and support (15) incl. lower cover
sheet (16).
5. Mount the cover.
11
9
2 - wrong
12 13 12
14
15
16
10
9
14
19
10
3 - wrong