Cisco 3800 Series Configuring - Page 20
Browse online or download pdf Configuring for Wireless Access Point Cisco 3800 Series. Cisco 3800 Series 32 pages. Password recovery procedure
Also for Cisco 3800 Series: Datasheet (8 pages), Application Note (41 pages), Troubleshooting Manual (15 pages), Datasheet (20 pages), Quick Start Manual (40 pages), User Manual (7 pages)
Print Page
How to Configure Radio Settings on an Access Point
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
interface dot11Radio interface
Example:
Router(config)# interface dot11Radio 0/3/0
Step 4
payload-encapsulation {rfc1042 | dot1h}
Example:
Router(config-if)# no dot11 extension aironet
Step 5
end
Example:
Router(config-if)# end
Step 6
copy running-config startup-config
Example:
Router# copy running-config startup-config
20
enable
configure terminal
interface dot11Radio interface
payload-encapsulation {rfc1042 | dot1h}
end
copy running-config startup-config
Configuring Radio Settings on an Access Point
Purpose
Enables privileged EXEC mode.
•
Enter your password if prompted.
Enters global configuration mode.
Enters radio interface configuration mode.
•
The interface argument is in module/slot/port format,
except for the Cisco 800 series and Cisco 1800 series
fixed-configuration routers, where the interface
argument is either 0 or 1.
The 2.4-GHz radio is port 0, and the 5-GHz radio is
•
port 1.
Specifies the encapsulation transformation method to RFC
1042 (SNAP) or dot1h (IEEE 802.1h).
Returns to privileged EXEC mode.
(Optional) Saves your entries in the configuration file.