Cisco 800 Series Release Notes - Page 10
Browse online or download pdf Release Notes for Wireless Access Point Cisco 800 Series. Cisco 800 Series 36 pages. Fast step software design guide
Also for Cisco 800 Series: Quick Start Manual (13 pages), Quick Start Manual (17 pages), Configuring (32 pages), Design Manual (50 pages)
Print Page
New and Changed Information
Table 6
Feature List by Feature Set for the Cisco 827 and Cisco 827-4V Routers (continued)
Features
RIP, RIPv2
Voice Features (Cisco 827-4V only)
G.711, G.729a, G.723.1 Codecs
with High-Performance DSP
Support
Loop-Start Key-System or Direct
Phone Support
RAS Gatekeeper Communications
Protocol
VoIP H.323
New and Changed Information
New Software Features in Release 12.1(5)YC1
Cisco 827 and Cisco 827-4V Routers
The following new software features are supported by the Cisco 827 and Cisco 827-4V routers for
Cisco IOS Release 12.1(5)YC3 and above:
OpenDSL
This feature implements auto-provisioning of the Cisco 827 and Cisco 827-4V routers.
Auto-provisioning operates at bootup, and includes two procedures: Device Authentication and Image
Maintenance. The router will be authenticated at bootup using its vendor ID and serial number. It then
requests the Proxy Element to download its configuration file, and configures itself from CLIs in this
file. It then polls for configuration changes, and downloads a new image and configuration file, if
available, to retrieve the latest changes.
Release Notes for the Cisco 800 Series Routers for Cisco IOS Release 12.1(5)YC
10
Feature Sets
IP/FW
IP/
Plus
In
IP
Voice
IPSec 56
Yes
Yes
Yes
No
Yes
No
No
Yes
No
No
Yes
No
No
Yes
No
IP/FW/
IP/FW
Voice
IP/IPX/
Plus
Plus
Voice
IPSec
IPSec 56
Plus
3DES
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
IP/IPX/
IP/IPX/
FW/Plus
FW Plus
Voice
IPSec
IPSec
3DES
3DES
Yes
Yes
No
Yes
No
Yes
No
Yes
No
Yes
78-12776-04