Cisco AIR-AP1141N-E-K9 Getting Started Manual - Page 2
Browse online or download pdf Getting Started Manual for Wireless Access Point Cisco AIR-AP1141N-E-K9. Cisco AIR-AP1141N-E-K9 37 pages. Autonomous access point
Print Page
78-18997-01
1
About this Guide
This Guide explains how to install and configure your Cisco Aironet 1140 Series Autonomous Access
Point. This guide also provides mounting instructions and limited troubleshooting procedures.
2
Safety Instructions
Translated versions of the following safety warnings are provided in the translated safety warnings
document that is shipped with your access point. The translated warnings are also in the Translated
Safety Warnings for Cisco Aironet Access Points, which is available on your documentation CD and
cisco.com.
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury.
Before you work on any equipment, be aware of the hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents. Use the
statement number provided at the end of each warning to locate its translation in the
translated safety warnings that accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
Warning
Read the installation instructions before you connect the system to its power source.
Statement 1004
Warning
This product must be connected to a Power-over-Ethernet (PoE) IEEE 802.3af compliant
power source or an IEC60950 compliant limited power source. Statement 353
Warning
This equipment must be externally grounded using a customer-supplied ground wire
before power is applied. Contact the appropriate electrical inspection authority or an
electrician if you are uncertain that suitable grounding is available. Statement 366
2