CABASSE THE PEARL User Manual - Page 5

Browse online or download pdf User Manual for Speakers CABASSE THE PEARL. CABASSE THE PEARL 10 pages.
Also for CABASSE THE PEARL: User Manual (16 pages)

Print Page

WIRED AND NON-WIRED INPUTS

ANALOG INPUT

This input can be connected to an

audio source (CD player, MP3 player,

smartphone, TV) equipped with an

analog output type RCA or mini-jack.

Use RCA / RCA cord or minijack / RCA

cord (not included)

USB INPUT

This input is only useful for use in Wi-Fi / Ethernet

mode (paragraphs 4,5,6 below). Connect a USB stick

or hard drive containing audio files to this input

to automatically network them. All files in formats

recognized by the DLNA server included in THE

PEARL are then listed in the Stream Audio Control

application and can be read by all Cabasse Stream

players connected to the same network. The PEARL

USB socket has a 5V - 1A DC power supply for use

with a portable hard drive without external power

supply.

BLUETOOTH CONNECTION

1. Once the speaker is on, press the "Pairing" button on the back

2. The "Pairing" LED on the back should flash

3. Activate Bluetooth on your mobile

4. Select "THE PEARL XXXX Cabasse" from the list of available devices

5. Once the connection is successful, the LED "Pairing" on the back stops flashing

WIRE CONNECTION (LAN) TO THE ETHERNET NETWORK

The wired Ethernet connection guarantees an optimum

and constant transfer rate in any environment. Use this

if Wi-Fi mode operation shows untimely cuts or stops

of music, signs of a saturated Wi-Fi network, or too

much

router-to-stream

distance.

Connect an RJ45 cable between THE PEARL and

your router (or Box Internet). The connection

established when the ETH diode changes to solid blue.

The WIFI connection is then automatically disabled.

CAUTION: DHCP mode of the router must be enabled.

DIRECT WIFI MODE

This connection mode makes it possible to broadcast in WiFi quality the audio files present in the tablet

(or the smartphone) and on the support (hard disk, key) USB connected to the USB input of THE PEARL

without having recourse or need of a Wi-Fi network. It does not provide access to internet sources

(Vtuner, Deezer) or audio files in the home network and does not allow THE PEARL updates. Once the

Cabasse StreamCONTROL application is installed on the tablet or phone and the PEARL is activated:

- press the PEARL "pairing" button for 3 seconds

- open the application and choose "configure a new drive", on demand go to "settings"

in the tablet or smartphone and select THE PEARL XXX in the wi-fi settings.

- return to the Stream Control application, close it and restart it then select:

"use in direct access mode".

Follow the instructions and start listening to your favorite music from your smartphone or a key or hard

drive connected to THE PEARL's USB input.