Cisco AIR-AP1800I-E-K9 Getting Started Manual - Page 6

Browse online or download pdf Getting Started Manual for Wireless Access Point Cisco AIR-AP1800I-E-K9. Cisco AIR-AP1800I-E-K9 43 pages.

Print Page

This product and all interconnected equipment must be installed indoors within the same

Caution

building, including the associated LAN connections as defined by Environment A of the

IEEE 802.3af/at Standard.

This equipment is suitable for use in environment air spaces (plenums) in accordance with

Note

Section 300.22 (C) of the National Electrical Code, and Sections 2-128, 12-010(3) and 12-100

of the Canadian Electrical Code, Part 1, CSA C22.2. External power supply, power adapter

and/or power injector, if provided, are not suitable installation in air spaces.

Use only with listed Information Technology Equipment (ITE) equipment. For more

Note

information on ITE equipment, refer to article 645 of the latest National Electrical Code

(NEC).

Unpacking the AP

To unpack the access point, follow these steps:

Unpack and remove the access point and the mounting accessories, from the shipping box.

Step 1

Step 2

Return any packing material to the shipping container and save it for future use.

Verify that you have received the items listed below. If any item is missing or damaged, contact

Step 3

your Cisco representative or reseller for instructions.

The access point.

–

Mounting bracket AIR-AP-BRACKET-NS.

–