Cisco AIR-LAP1232AG-C-K9 Datasheet - Page 4
Browse online or download pdf Datasheet for Wireless Access Point Cisco AIR-LAP1232AG-C-K9. Cisco AIR-LAP1232AG-C-K9 8 pages. Aironet 1230ag series 802.11a/b/g access point
Print Page
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Summary/Conclusion
Cisco Aironet 1230AG Series access points feature antenna connectors for greater range or
coverage versatility using a broad selection of available Cisco antennas, as well as a rugged metal
housing for operation over extended temperature ranges typical of industrial environments. Dual
802.11a and 802.11g radios deliver a combined capacity of 108 Mbps, meeting the performance
requirements of the most demanding applications, while hardware-assisted AES encryption
provides uncompromised support for interoperable IEEE 802.11i and WPA2 security.
Product Specifications
Table 2 lists the product specifications for Cisco Aironet 1230AG access points.
Table 2.
Product Specifications for Cisco Aironet 1230AG Access Points
Item
Specification
Part Number
● AIR-AP1232AG-x-K9 (Cisco IOS Software)
● AIR-LAP1232AG-x-K9 (Cisco Unified Wireless Network Software)
Note: The Cisco Aironet 1230AG Series may be ordered with Cisco IOS Software to operate as an
autonomous AP or with Cisco Unified Wireless Network Software using the Lightweight Access
Point Protocol (LWAPP). When the 1230AG is operating as a lightweight AP a WLAN controller is
required.
Regulatory domains: (x = regulatory domain)
● A = FCC
● C = China
● E = ETSI
● I = Israel
● K = Korea
● J = TELEC (Japan) for AP 1232AG only
● N = North America (Excluding FCC)
● P = Japan2
● S = Singapore
● T = Taiwan
Customers are responsible for verifying approval for use in their individual countries. To verify
approval and to identify the regulatory domain that corresponds to a particular country, please visit:
http://www.cisco.com/go/aironet/compliance
Not all regulatory domains have been approved. As they are approved, the part numbers will be
available on the Global Price List.
Software
● Cisco IOS Software Release 12.3(8)JA or later (autonomous).
● Cisco IOS Software Release 12.3(11)JX or later (Lightweight Mode).
● Cisco Unified Wireless Network Software Release 4.0 or later.
● 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
Data Rates
Supported
● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
Network
IEEE 802.11a, 802.11b, and 802.11g
Standard
Uplink
Autosensing 802.3 10/100BASE-T Ethernet
Radio Module
● 802.11a: CardBus (32-bit)
Form Factor
● 802.11g: Mini-PCI (32-bit)
Data Sheet
Page 4 of 8