Cisco aironet 1130 Configuration Manual - Page 13

Browse online or download pdf Configuration Manual for Wireless Access Point Cisco aironet 1130. Cisco aironet 1130 40 pages. Wlc (wireless lan controller), wism (wireless services module) integrated wlc with aps

Print Page

Section 1: SVP

PN: 1725-36192-001_H

Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs

Global settings for

were not tested. For

Assignment

settings please consult your facility's RF site survey — optimized for

wireless voice traffic — to determine correct power and channel

settings for each AP using only channels

4. Set

Admin Status

5. Configure any other settings that might be relevant to your

deployment as needed.

6. Click the

button to save all changes.

Apply

Screenshot for 1100, 1130, 1200, 1230 and 1240 series access points:

Screenshot for 1140 and 1250 series access points:

7. In the navigation pane under

8. Set

802.11b/g Network Status

after setting radio parameters.

For setting up the

survey, designed for voice traffic, to determine if you have sufficient

coverage to support all data rates. SpectraLink Wireless

Telephones require the following minimum dBm reading to support

the corresponding

RF Channel Assignment

Custom Tx Power

Enable

802.11b/g/n

. The radio will be re- enabled

Disable

please consult your facility's RF site

Data Rates,

data rate setting in the access point.

Mandatory

and

Tx Power Level

and

RF Channel

and

, click

Network