Argent FM2963801 Care & Installation Manual

Browse online or download pdf Care & Installation Manual for Bathroom Fixtures Argent FM2963801. Argent FM2963801 2 pages. Bath filler

Print Page

ARGENT BATH FILLERS

NOTES PRIOR TO INSTALLATION

1. INSPECT ALL PARTS PRIOR TO INSTALLATION FOR SUITABILITY AND/ OR DEFECTS

2. ANY SUSPECTED DEFECT SHOULD BE REPORTED AS SOON AS POSSIBLE

3. SHOULD ANY PRODUCT BE INSTALLED DESPITE A FAULT HAVING BEEN FOUND AND REPORTED, ARGENT WILL

NOT ACCEPT LIABILITY FOR THE COST OF LABOUR TO REMOVE AND INSTALL ANY REPLACEMENT PRODUCT/S

NOTES FOR INSTALLATION

1. PLEASE ENSURE PIPEWORK IS FLUSHED CLEAR OF DEBRIS BEFORE

INSTALLING ROUGH IN BODY AND BATH FILLER.

2. INLET PRESSURE RANGE 100 – 500KPA

3. MAXIMUM HOT WATER TEMPERATURE 60 C

4. AS/NZS 3500 REQUIRES 500 KPA MAXIMUM OPERATING PRESSURE AT

ANY OUTLET WITHIN A BUILDING

5. HOT & COLD INLETS SHOULD HAVE EQUALISED WATER PRESSURES.

6. NOT SUITABLE TO BE INSTALLED WITH A GRAVITY FEED SYSTEM

STEP1

IN FLOOR BODY ROUGH IN

1. For new installations, install the rough in body in the designated place so that the base is 50-55mm below

the finished floor height. For retro fit installations, CHASE A CHANNEL IN THE FLOOR IN THE designated place

for the ROUGH IN base. (50-55mm depth) Ensure that the plastic cover is installed level to the finished floor

surface.

2. Connect the hot and cold water feed pipes using thread seal tape or equivalent. Red = Hot, Blue = Cold

3. Mark and secure the rough in body using all four fastening points, check that the rough in body is true and

level when tightening the bolts. Use shims to level if required.

4. Leave the plastic blanking plate in place for wet seal test.

5. Ensure there is a 95mm clearance hole around the rough in body while backfilling or tiling the floor

Technical Hotline

1800 356 717

STEPS 2&3

Customer Central

1300 364 748

Argent Bath Filler

Care & Installation Guide

WMKT21008

Please direct any feedback for this

STEPS 4&5

3718

product to Customer Central:

or call 1300 364 748